1 publication order number : 50c02ch/d www.onsemi.com ? semiconductor components industries, llc, 2016 april 2016 - rev. 2 50c02ch bipolar transistor 50v, 0.5a, low vce(sat), npn single features ? large current capacitance ? low collector to emitter saturation voltage (resistance): r ce (sat) typ=175m [i c =0.5a, i b =50ma] ? ultrasmall package facilitates mini aturization in end products ? small on-resistance (ron) typical applications ? low-frequency amplifier ? high speed switching ? small motor drive ? muting circuit specifications absolute maximum rating at ta = 25 c (note 1, 2) parameter symbol value unit collector to base voltage v cbo 60 v collector to emitter voltage v ceo 50 v emitter to base voltage v ebo 5v collector current i c 500 ma collector current (pulse) i cp 1.0 a collector dissipation (note 2) p c 700 mw junction temperature tj 150 c storage temperature tstg ? 55 to +150 c note 1 : stresses exceeding those listed in the maximum ratings table may damage the device. if any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. note 2 : surface mounted on ceramic substrate(600mm 2 0.8mm) electrical connection marking ordering information see detailed ordering and shipping information on page 5 of this data sheet. 3 2 1 1:base 2 : emitter 3 : collecto r cx lot no. cph3 3 2 1
50c02ch www.onsemi.com 2 electrical characteristics at ta = 25 c (note 3) parameter symbol conditions value unit min typ max collector cutoff current i cbo v cb =40v, i e =0a 100 na emitter cutoff current i ebo v eb =4v, i c =0a 100 na dc current gain h fe v ce =2v, i c =10ma 300 800 gain-bandwidth product f t v ce =10v, i c =50ma 500 mhz output capacitance cob v cb =10v, f=1mhz 2.8 pf collector to emitter saturation voltage v ce (sat) i c =100ma, i b =10ma 50 100 mv base to emitter saturation voltage v be (sat) i c =100ma, i b =10ma 0.9 1.2 v collector to base breakdown voltage v (br)cbo i c =10 a, i e =0a 60 v collector to emitter breakdown voltage v (br)ceo i c =1ma, r be = 50 v emitter to base breakdown voltage v ( br ) ebo i e =10 a, i c =0a 5 v turn-on time t on see specified test circuit 30 ns storage time t st g 340 ns fall time t f 55 ns note 3 : product parametric performance is indicated in the elec trical characteristics for the listed test conditions, unless o therwise noted. product performance may not be indicated by the electrical characteristics if operated under different conditions. switching time test circuit
50c02ch www.onsemi.com 3
50c02ch www.onsemi.com 4
50c02ch www.onsemi.com 5 on semiconductor and the on logo are registered trademarks of semiconductor components industries, llc (scillc) or its subsidiaries in the united st ates and/or other countries. scillc owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. a lis ting of scillc?s product/patent coverage may be accessed at www.onsemi.com/site/pdf/patent-marking.pdf . scillc reserves the right to make changes with out further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any parti cular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specific ations can and do vary in different applications and actual performance may vary over time. all operating parameters, including ?typicals? must be validated fo r each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc pro ducts are not designed, intended, or authorized for use as com ponents in systems int ended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a situation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees ar ising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that sci llc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject t oall applicable copyright laws and is not for resale in any manner. cph3 case 318ba issue o package dimensions unit : mm ordering information device marking package shipping (qty / packing) 50c02ch-tl-e cx cph3 (pb-free) 3,000 / tape & reel ? for information on tape and reel specifications, including part orientation and tape sizes, plea se refer to our tape and reel packaging specifications brochure, brd8011/d. http://www.ons emi.com/pub_link/collateral/brd8011-d.pdf recommended soldering footprint 1 : base 2 : emitter 3 : collector 0.6 2.4 0.95 0.95 1.4
|
